home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dcom.modems
- Path: news.new-york.net!actcom!news
- From: davidzad@shani.net (David Zadikoff)
- Subject: Re: Voice modem
- X-Nntp-Posting-Host: teleport801.shani.co.il
- Message-ID: <Do0pxL.M3G@actcom.co.il>
- Sender: news@actcom.co.il (News)
- Organization: ACTCOM - Internet Services in Israel
- X-Newsreader: WinVN 0.93.11
- References: <4hks0r$s3i@phcoms4.seri.philips.nl>
- Mime-Version: 1.0
- Date: Sat, 9 Mar 1996 20:51:21 GMT
-
-
- Hi Theo,
- Who ever said life was easy?
-
- >After that I can not get back in the command mode, so my
- >modem does not
- >accept new AT-commands anymore. Can anyone give me a hint?
- >To get into the speech mode I used the following commands:
- >AT#VCL=1 (selects voice mode)
- >AT#VPY (enter play mode)
- >
-
- You do not state whate modem chipset you have but by the AT commands you
- are using I assume it is a Cirrus. In order to go back into command mode
- you have to pass a data stream terminator which in your case is hex $10
- $03 (DLE) (ETX). You should then receive the OK prompt.
- The subject demands more than can be posted here, so if you send me your
- e-mail address I will send you the complete command reference for exiting
- record and playback modes.
- Regards,
- David Zadikoff
- davidzad@shani.net
-
-